Who makes the Sony f-9308-750-0 LCD lamps?

Sony doesn't make lamps for their LCD TVs! Philips is the original lamp manufacturer for your Sony f-9308-750-0 Lamp. In rare instances, Osram may also be the original, but they still use a Philips lamp driver, or ballast, so it's best to replace with a Philips brand UHP lamp!

Sony f-9308-750-0 replacement lamp Watch my demonstration!

How does the Sony f-9308-750-0 LCD Lamp work?

  • Sony f-9308-750-0 lamps are pre-charged with about 15,000 volts
  • There is no actual filament inside because it's a gas lamp
    (Hg - mercury vapor)
  • Sony LCD lamps will fail continuity test

How long do Sony LCD lamps usually last?

  • First Generation Sony lamps lasted from 2,000 to 3,000 hours or more.
  • Second Generation Sony lamps will last up to 8,000 hours.
  • Second Generation Sony lamps have better consistency.
  • All depending on your usage and the type of lamp you have.

What are the benefits of replacing the entire lamp unit (the lamp and the enclosure)?

  • Super quick installation.
  • Just pop the old one out, and the new one in.
  • Newer enclosures don't warp and are safer to re-use later.
  • The cost is now almost negligible. You'll spend only $20.00 more for a lamp inside the enclosure from Discount-Merchant.com.

How easy is it to replace just the lamp?

It can take anywhere from 5-15 minutes depending on your personal dexterity with a screw driver, but replacing a lamp yourself is very straight forward. I can do it in 5 minutes!

Whether you have a Samsung, RCA, or Mitsubishi, swapping out the lamp is very easy. The ballast wires don't even have to go in any particular order because most LCD's use AC (alternating current, for those tech-savvy people).

Where do I purchase the lamps?

Sony f-9308-750-0, sometimes written as XL-5000 can be purchased from many places such as Discount-Merchant.com, which sells bulb-only and lamps with enclosures for various TV models. I highly recommend them because they are one of the largest parts distributors in the United States with a very loyal customer base. Any company can sell you lamps, but Discount-Merchant.com also provides free technical support and same day shipping--just read their reviews online!

What TV Models are compatible with the Sony f-9308-750-0 lamp?

These are the compatible TV models for this part number, you can click on the TV model number to access the owners manual


NOTE: You're not always going to be able to see the part numbers and you shouldn't worry about them. The complete cage part number is what matters and this is usually on the lamp housing and on the right side of your TV.

Symptoms of a bad lamp:

  • If you hear audio, but have no picture
  • If you hear a ballast click, but the lamp doesn't ignite
  • If you can't see the lamp light up in the back of the TV
  • If you have blinking lamp indicator lights
  • Visual indication that the lamp is blown
  • Dim picture after years of use

Symptoms of another part malfunctioning:

  • Consistent or inconsistent clicking from the ballast
  • Screeching or winding sounds from the color wheel
  • No picture, no audio (possible power supply or ballast)
  • Blurry picture, or truncated picture (DMD or light tunnel)
  • No blinking lights, or different blinking lights
  • Spots or blobs on the screen (prevalent in LCD projection)

How do I take my enclosure out of my TV?

Sony f-9308-750-0 lamp door
Unplug your TV set first and locate the lamp door.
Sony f-9308-750-0 removing screws
1. Push the clips and remove the door.

Sony f-9308-750-0 removing the door
2. Unlock the door.
Sony f-9308-750-0 locating the lamp
3. Now that is unlocked, remove the second door.

Sony f-9308-750-0 taking it out
4. Gently pull the connector going to the ballast.
Sony f-9308-750-0 getting new lamp
5. Gently take your enclosure out.

Sony f-9308-750-0 putting it back
6. Prepare your new enclosure to be installed.
Sony f-9308-750-0 securing the lamp
7. Slide in the new enclosure.

Sony f-9308-750-0 closing door
8. Put the enclosure door back in its place.
Sony f-9308-750-0 lamp panel
9. Secure the clips from the door and that's it. We're finished..

Sony f-9308-750-0 lamp Click here to watch the video guide!

What do I need to replace my lamp?

What you'll need:

  1. Phillips screwdriver
  2. New LCD Lamp (You can buy it from Discount-Merchant.com)
  3. Gloves are recommended

Note: You should handle the bulb with gloves or a lint-free cloth. Oils from your fingers can damage the bulb!


This is what happens when you touch the lamp with bare hands

1. Oils from your fingers get on the glass of the lamp.

2. When the lamp is on, the oils help heat up that particular spot on the lamp, called a hot spot.

3. That hot spot can shatter the glass on the lamp.

NOTE: The lamp can still be usable, but there will be a noticeable shadow in the picture.

Sony f-9308-750-0 - what not to do


Sony f-9308-750-0 Replacement Guide

Sony f-9308-750-0 lamp
1. Sony f-9308-750-0 DLP lamp casing
Sony f-9308-750-0 casing
2. Start by removing the black screw on the side of the metal cage.

Sony f-9308-750-0 lamp screws
3. Next, remove the ones holding the metal securing extensions in place.
Sony f-9308-750-0 holder
4. Now separate the high temperature plastic base with de bulb attached from the rest of the enclosure.

Sony f-9308-750-0 lamp side terminal
5. This is what it looks like when successfully retrieved.
Sony f-9308-750-0 lamp top terminal
6. On two of the four corners you’ll find a metal clip like this one, holding the lamp in place.

Sony f-9308-750-0 lamp holder
7. Take it out and slip the bulb out from the corner you unscrew the clip.
Sony f-9308-750-0 lamp replacement
8. Here is the base of the lamp once the bulb is out.

Sony f-9308-750-0 lamps old and new
9. Now take out your new Philips Bulb so you can replace the old one. Be extra careful when handling the bulb, it’s very fragile.
Sony f-9308-750-0 lamp enclosure
10. Insert the new bulb back, and make sure the cables are connected securely and in the right place on the base.

Sony f-9308-750-0 lamp placing holder
11. Grab the rest of the enclosure and install in back on to the bulb, but don't forget to place the security.
Sony f-9308-750-0 lamp screwing holder
12. Reinsert the black screw to hold the enclosure back together.

Sony f-9308-750-0 lamp cover
13. Finally place the last two to hold the metal extensions and make sure it doesn’t move.
Sony f-9308-750-0 replacement lamp enclosure
14. And you´re all finished replacing your lamp.

Sony f-9308-750-0 lamp Click here to watch the video guide!

Front Panel LED Indicators

Power

None
TV is ON

Flashes
The lamp for the light source is ready to turn on. Within 30 minutes the picture is displayed on the screen.

Standby

None
The TV is in stand by mode. The monitor is turned on by pressing power on the remote control.

Flashes
The auto shut off function works. The monitor has been turned off when the time you specify has passed after the input of the computer is cut off.

Lamp

Flash
The air filter or the lamp cover is not attached securely. When you correct, te standby lamp lights up and the monitor enters the standby mode.

Comment on this article!

Any questions or comments are appreciated; I'll try to answer them as soon as I can! Simply drop me an email at adelauney84@hotmail.com. So, leave some comments!

  • How long has your lamp lasted? I've heard some lasting 15,000 hours!
  • Was it easy to install?
  • Who have you purchased from?
  • What's your experience buying online?

You can also sign up for our forums at FixYourDLP.com/forums for expert advice!

Comment Script

Comments

Name
E-mail (Will not appear online)
Homepage
Title
Comment
This comment form is powered by GentleSource Comment Script. It can be included in PHP or HTML files and allows visitors to leave comments on the website.